Microprocessor transmitter for Pt100




www.seneca.it

Art.Nr.: FlexTop

Kontakta oss för prisupgift
 Antal:
 
 
Instrument with galvanic separation used for converting a temperature signal from PT100 thermoprobe into a standard V-mA signal.


The instrument is provided with a three-point galvanic separation between input, output and power supply with 1500 Vac insulation and can therefore be positioned at a considerable distance if necessary (a few hundred metres) from the probe without running the risk of obtaining a measurement affected by the differences in potential or the disturbances present in the earthing circuit. Input from PT100 thermoprobe with 2 or 3 wire connection, with three standard pre-set ranges: 0 - 100 °C, 0 - 200 °C and 0 - 400 °C which can be selected via two dip switches on the front panel. Possibility of calibration in customized ranges by means of internal ZERO and SPAN trimmers. Output selectable via four dip switches for the following signals: current 0 - 20 mA and 4 - 20 mA, with both active and passive connection and maximum load 600 ohm; voltage 0 - 5 Vdc, 1 - 5 Vdc, 0 - 10 Vdc and 2 - 10 Vdc. The "V0" self-extinguishing glass filled nylon case is the width of 1 DIN module and is designed to fit on 35 mm mounting rail (DIN 46277).

www.seneca.it

Art.Nr.: Z109PT

Pris: 1 020 SEK exkl moms

Antal:
 
 
Thermocouple converter




www.seneca.it

Art.Nr.: Z109TC

Pris: 1160 SEK exkl moms

Antal:
För ytterligare produkter kontakta oss info@mastre.se eller Tfn. 060-57 39 00